Licensed & Insured, in Columbia and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Columbia
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (573) 296-4898 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Columbia and surrounding areas · On-site visits included · Free estimate within 24h
Columbia Metal Roofing is a team of local certified professionals based in Columbia. We respond quickly in Columbia and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (573) 296-4898⭐⭐⭐⭐⭐ 4.9/5 · 330 verified Google reviews
“We needed a metal roof on our new equipment garage out in the county and these guys handled the whole thing. The crew of four knocked out the corrugated panels in about three days, and they cleaned up every last screw and scrap before leaving. Couldn't be happier with how solid it turned out.”
Commercial Metal Roofing
“Had them put a copper roof over our covered back porch and it looks incredible. The seams are tight and the flashing around the posts is flawless. It wasn't the cheapest option but you can tell they know specialty metal work.”
Copper & Specialty Metal Roofing
“Our old barn roof was rusted through in spots and we were worried about the hay inside. Columbia Metal Roofing tore off the old panels and replaced the whole thing with ribbed steel in under a week. The animals and equipment stayed dry through the last big storm, so that says it all.”
Metal Roof Replacement
“Went with standing seam for our house and I'm glad we did. The crew was professional and the finished roof looks sharp from the street. Only gripe is they showed up a day later than scheduled, but the work itself is top notch.”
Standing Seam Metal Roofing
“We had a leak where the chimney meets the metal roof and two other companies couldn't figure it out. These folks reflashed the whole chimney and sealed it properly. No leaks since, even after all that spring rain. Genuinely relieved.”
Chimney & Skylight Repair
“They installed a metal roof on our new build and worked around all the trees in the yard without damaging a single one. Straightforward pricing and the crew was easy to deal with. Would use them again in a heartbeat.”
Metal Roof Installation
“Decided to go over our old shingles instead of tearing them off, and Columbia Metal Roofing walked me through the whole retrofit process. The new metal roof went on in two days and you'd never know there were shingles underneath. Surprised how painless it was.”
Metal Roof Over Shingles (Retrofit)
“Called them out for an inspection on a house we were buying and they found a few loose fasteners and worn flashing we would've missed. They fixed the screws and resealed the flashing on the spot. Fair price and no pressure to sell us a whole new roof.”
Metal Roof InspectionReal photos of our work in Columbia · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener ribbed panel installation | Starting at $8/sq ft | Includes panels, underlayment and standard flashing; roof pitch and deck repair move the number. |
| Standing seam installation | Starting at $12/sq ft | Concealed fasteners and raised seams; complex hips, valleys and historic review add labor. |
| Metal shingle or stone-coated steel installation | Starting at $13/sq ft | Stamped or granule-coated panels; steep pitches and multiple penetrations raise the rate. |
| Tear-off and deck repair | On estimate | Layer count, soft decking and disposal access require an on-site look before pricing. |
| Travel | Included | In Columbia and surrounding Boone County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (573) 296-4898, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $10/sq ft | Panels, concealed clips and standard trim; pitch and roof complexity move the rate up. |
| Tear-off and redeck | Quoted per square | Removal of existing shingles and deck repair; number of layers and rot drive the price. |
| Complex flashing package | On estimate | Chimneys, skylights and valleys priced after an on-site look at the details. |
| Historic or HOA design review | Included | We help prepare profile and color details for review at no separate charge. |
| Travel | Included | in Columbia and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (573) 296-4898, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener replacement | Starting at $9/sq ft | Full tear-off, deck inspection, underlayment and new corrugated or ribbed panels, haul-away included. |
| Standing seam replacement | Starting at $14/sq ft | Concealed-fastener panels over repaired deck; price rises with pitch, stories and flashing complexity. |
| Stone-coated steel or metal shingle replacement | Starting at $13/sq ft | Full tear-off and new steel shingle system; cost moves with roof cuts, valleys and HOA profile rules. |
| Complex or large-scale job | On estimate | Steep multi-gable roofs, historic homes and heavy deck repair need an on-site look before pricing. |
| Travel | Included | In Columbia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (573) 296-4898, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over one shingle layer, simple gable | Starting at $7/sq ft | Includes separation underlayment, edge metal and standard flashing on an accessible low-pitch roof. |
| Retrofit with stone-coated steel or metal shingle | Starting at $9/sq ft | Premium panel profile and color matching add material cost and slightly more layout time. |
| Complex roof with multiple chimneys and valleys | On estimate | Steep pitch, multiple penetrations and historic district details need an on-site look before pricing. |
| Deck repair found during inspection | Quoted separately | Soft sheathing or rotten fascia is repaired and priced before panels are ordered, never buried in the total. |
| Travel | Included | In Columbia and surrounding Boone County communities, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (573) 296-4898, no obligation to book the work. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, washers, sealant) | Starting at $450 | Covers a small leak fix with new screws, washers and sealant on an accessible roof. |
| Panel replacement (1 to 3 panels) | Starting at $850 | Includes matching panels, fasteners and labor; pitch and roof height move the price. |
| Flashing rebuild at chimney or skylight | Starting at $950 | Rebuilds counter-flashing and step flashing; brick chimneys and steep pitches add labor. |
| Storm damage repair (multiple areas) | On estimate | Needs an on-site look to document hail and wind damage and scope the full repair. |
| Travel | Included | In Columbia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (573) 296-4898, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak point repair | Starting at $450 | Diagnosis plus repair of one failed fastener, pipe boot, or small flashing gap, materials included. |
| Multi-point or full screw replacement | Starting at $850 | Replacing failed screws and washers across a panel run, priced by roof size and access. |
| Chimney or skylight flashing rebuild | Starting at $750 | Removing failed flashing and rebuilding the transition, with height and pitch driving the price. |
| Emergency tarping after storm | Starting at $350 | Temporary tarp and stabilization after hail or wind, permanent repair quoted separately. |
| Complex or large-scale job | On estimate | Panel replacement or multiple leak sources need an on-site look before a number is given. |
| Travel | Included | In Columbia and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single slope or small outbuilding re-fastening | Starting at $750 | Includes full fastener inspection, oversized screw replacement, and new UV-resistant washers on one slope. |
| Full roof re-fastening (residential) | Starting at $1,450 | Covers every slope, with price driven by roof size, pitch, and total failed fastener count. |
| Fastener plus flashing repair | Starting at $1,100 | Re-fastens the field and re-seals chimney or skylight flashing in the same visit. |
| Steep or two-story access | Quoted on site | Pitch and height add labor, so we walk the roof before giving a firm number. |
| Travel | Included | In Columbia and surrounding Boone County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (573) 296-4898, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, standard shed or carport | Starting at $5.50/sq ft | Includes tear-off, underlayment, panels, screws and basic trim on good-access buildings |
| R-panel roof, workshop or machine shed | Starting at $6.25/sq ft | Includes purlin check, raised-rib panels and closures; pitch and span move the price |
| Barn or agricultural building re-roof | On estimate | Tall structures, long spans and framing repair need an on-site look before pricing |
| Re-fastening and repair on existing panels | Starting at $850 | New gasketed screws, closures and trim; number of panels and leak points sets the total |
| Travel | Included | In Columbia and surrounding Boone County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (573) 296-4898, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle profile | Starting at $9/sq ft | Includes tear-off, underlayment, panels and standard flashing on a simple gable roof. |
| Shake or slate profile | Starting at $11/sq ft | Premium textured panels with deeper shadow lines, priced higher for the finish and trim work. |
| Complex or steep roof | On estimate | Multiple valleys, dormers, chimneys or historic-district review need an on-site look before pricing. |
| Deck repair and flashing | Quoted per scope | Soft sheathing, chimney flashing and skylight work priced from the inspection findings. |
| Travel | Included | In Columbia and surrounding Boone County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (573) 296-4898, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard gable | Starting at $9/sq ft | Includes tear-off of one layer, underlayment, panels, and standard flashing on an accessible roof. |
| Stone-coated steel, steep or complex roof | Starting at $12/sq ft | Covers steep pitch, multiple valleys, and extra flashing around chimneys and skylights. |
| Recover over one existing shingle layer | Starting at $8/sq ft | Installs over one sound layer where local code allows, with new underlayment and flashing. |
| Hail or wind damage repair | On estimate | Panel replacement and re-flashing priced after we inspect the damage and match the profile. |
| Travel | Included | In Columbia and surrounding Boone County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (573) 296-4898, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent roofing (porch, bay, dormer) | Starting at $20/sq ft | Includes hand-formed pans and custom flashings, with roof complexity and access driving the final number. |
| Full copper or zinc architectural roof | Starting at $35/sq ft | Includes full tear-off, underlayment and seamed pans, with metal weight and seam method moving the price. |
| Aluminum porch and low-pitch roof | Starting at $18/sq ft | Includes corrosion-resistant pans on low pitch, with deck condition and penetration count as the main variables. |
| Custom flashing and trim only | On estimate | Needs an on-site look because chimney, valley and wall details vary house to house. |
| Travel | Included | In Columbia and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (573) 296-4898, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective acrylic coating | Starting at $2.50/sq ft | Includes wash, rust spot treatment, seam sealing, and two finish coats on sound panels. |
| Rust converter and primer system | Starting at $3.25/sq ft | Adds chemical rust conversion and spot priming where fasteners and cut edges have rusted. |
| Heavy prep and pitted rust | On estimate | Wire brushing, panel repair and extended prep require an on-site look before pricing. |
| Steep or complex roof access | On estimate | Multiple chimneys, dormers and steep pitches add labor and fall protection time. |
| Travel | Included | In Columbia and surrounding areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (573) 296-4898, with no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Vent boot or pipe collar replacement | Starting at $600 | Covers one boot replacement, new collar and base seal, with height and access the main cost factor. |
| Skylight reseal and curb flashing | Starting at $600 | Includes new back-pan and curb cap metal, with rotted decking found underneath the main cost driver. |
| Chimney counter-flashing with reglet cut | Starting at $600 | New counter-flashing cut into brick or mortar, with chimney height and material choice moving the price. |
| Step flashing or valley metal run | On estimate | Needs an on-site measurement of the run, pitch, and decking condition before a number is given. |
| Emergency storm or ice damage repair | On estimate | Priority scheduling after hail or ice events, with urgency and damage extent setting the rate. |
| Estimate | Free | Roof inspection and written scope at (573) 296-4898, response within 24 hours, no obligation. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pad-style snow guards, single eave run | Starting at $1,200 | Includes layout, sealed pads, and cleanup on a standard single-story eave run up to about 40 feet. |
| Standing seam clamp and bar guards | Starting at $1,450 | Non-penetrating clamps and bar on a standing seam roof, priced by linear feet and row count. |
| Eave heat cable with controller | Starting at $950 | Self-regulating cable in eave and valley plus thermostat, priced by circuit length and electrical access. |
| Ice belt or snow fence over a drop zone | Starting at $1,800 | Continuous belt or fence panel over a doorway or walkway, priced by run length and roof pitch. |
| Complex or large-scale job | On estimate | Steep pitches, multi-story access, long barn runs, or combined ice protection need an on-site look first. |
| Travel | Included | In Columbia and surrounding Boone County areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing and fastener inspection with photo documentation and a written repair versus replacement recommendation |
| Minor repair (fasteners, seams, flashing) | Starting at $350 | Re-fastening, resealing and small flashing repairs; price rises with roof pitch, height and access difficulty |
| Panel or section replacement | Starting at $900 | Matched panel replacement and closures; cost depends on panel profile availability and extent of damage |
| Insurance claim documentation | Included with repair | Photo package, measurements and scope organized for your adjuster; coverage decisions rest with your insurer |
| Complex or large-scale storm job | On estimate | Multiple slopes, chimney or skylight damage and older roofs need an on-site look before pricing |
| Estimate | Free | Response within 24 hours at (573) 296-4898, no obligation to book the work |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Full walk-over with fastener, seam and flashing check, plus photo documentation of every finding. |
| Exposed-fastener screw audit | Starting at $250 | Row-by-row screw and washer check on corrugated and ribbed panels, priced by roof size and pitch. |
| Hail and storm damage report | Starting at $350 | Dent mapping and photo documentation for insurance, priced by panel type and roof access. |
| Pre-sale or insurance written report | On estimate | Needs an on-site look to scope the report detail, photo count and remaining service life assessment. |
| Travel | Included | In Columbia and surrounding Boone County areas, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (573) 296-4898, with no obligation to book the inspection. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter with hidden hangers | Starting at $9/linear ft | Includes on-site rolling, hidden hangers and basic downspouts; run length and corner count move the price. |
| Heavy-gauge steel gutter with strap hangers | Starting at $12/linear ft | Includes heavier trough and strap hangers for exposed-fastener roofs; roof height and access add cost. |
| Oversized 6-inch gutter with leaf protection | Starting at $16/linear ft | Includes larger trough and screened covers; heavy oak and Bradford pear debris loads justify the upgrade. |
| Copper or specialty metal gutter | On estimate | Material cost and soldered joints require an on-site look before a number is given. |
| Downspout and discharge upgrades | Starting at $18/linear ft | Includes added downspouts and buried or extended discharge lines; foundation slope and soil conditions affect scope. |
| Travel | Included | In Columbia and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Inspection and free estimate | Free | On-site walk, photo documentation and written scope, no obligation to book the work |
| Screw replacement and re-fastening | Starting at $850 | Pulled and rusted screws replaced with proper washers, priced by roof size and access |
| Exposed-fastener panel repair | Starting at $1,200 | Lifted or damaged panels reset or replaced with closures and sealant at penetrations |
| Insulated or standing seam panel replacement | On estimate | Span, slope, tear-off and insulation all need an on-site look before quoting |
| Travel | Included | In Columbia and surrounding Boone County areas, no separate call-out or mileage fee |
| Estimate response | Within 24h | Call (573) 296-4898 and we schedule a site visit, no obligation to book |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Columbia want more than a crew with a truck: they want straight answers about what their roof actually needs. Columbia Metal Roofing works through a network of licensed, insured local contractors who install, replace, re-roof, and repair metal roofing across Columbia and the surrounding communities of Ashland, Hallsville, Rocheport, and Centralia. We know the housing stock here, from the deep porches and brick chimneys of the old southwest neighborhoods to the low-pitched brick ranches out toward Lenoir and Brown Station.
That local knowledge matters because the conditions here are specific. Spring supercells bring large hail and straight-line wind, winter ice storms and freeze-thaw cycles work on flashing, and the rolling clay and limestone hills put real demands on every panel and fastener. Add in the region's large stock of 15 to 30 year old screw-down roofs, and you get a market where honest repair guidance is worth more than a sales pitch. If you want a clear read on your roof, start with a free estimate.
Most metal roof leaks in Columbia trace back to a handful of predictable failures, and knowing why they happen helps you decide what to do. The number one cause on 15 to 30 year old exposed-fastener roofs is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once that seal is gone, water finds the hole. Seams can separate as panels expand and contract with thermal movement. Pipe boots and flashing fail at chimneys, skylights, and valleys, where details take the most abuse from ice and freeze-thaw. Wind can lift and peel panels after a storm, and fallen limbs from the region's white oaks and hickories can puncture a panel outright.
Ignoring these problems is expensive. Water tracks along purlins and decking far from the point of entry, so a small leak at a fastener can show up as a stain across the ceiling. By the time it does, sheathing may be rotting and insulation may be soaked and compressed. That is why we push for a proper metal roof repair assessment early rather than a patch that hides the symptom.
The honest call between repair and replacement is not always replacement. On many older screw-down roofs, a full screw replacement and re-fastening with new sealing washers restores a watertight roof for a fraction of the cost of a new one. When seams, flashing, and panel condition are otherwise sound, that is often the right answer. Call (573) 296-4898 and we will tell you plainly which category your roof falls into.
We install the full range of metal systems, and the right choice depends on your home, your budget, and how much maintenance you want to own. Standing Seam Metal Roofing uses concealed clips and hidden fasteners for a clean, premium roof with no exposed screws to service. Corrugated & Ribbed Panel Roofing is the economical workhorse, well suited to barns, workshops, and machine sheds on the farmland around Ashland and Hallsville. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing for a hail-resistant, textured look, and Copper & Specialty Metal Roofing for accents and historic profiles.
The short version: standing seam costs more and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. Both are legitimate choices. We also handle Metal Roof Over Shingles (Retrofit) when the deck is sound, and we recommend tear-off when it is not. Matching the system to the house is the whole job.
Metal roof pricing in Columbia is usually quoted per square foot for installations and often as a flat rate for repairs. Typical ranges vary with the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. Final pricing depends on the roof and site conditions, so we quote after we see the property rather than guessing over the phone. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of how systems compare, see our pricing page, then request a free estimate or free roof inspection so we can give you a real number for your roof.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. Our job is to document what we see accurately and let your insurer decide.
On permits: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements are set locally. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Columbia building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Columbia Metal Roofing serves in Columbia and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Columbia · Response within 24h · No commitment · ☎ (573) 296-4898
Your Free Quote Request