Serving the Columbia area  ·  (573) 296-4898  ·  Open Mon-Sun 7am-7pm
📞 (573) 296-4898 Free Quote

Metal Roofing in Columbia, MO (65201) · Local Professionals

Columbia Metal Roofing · Fast response in Columbia and the Columbia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+330Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Columbia's mix of 1920s brick Victorians near downtown, 1960s ranches in Grasslands, and new builds out by Rock Bridge means roofs here take a beating from spring hail and straight-line wind. If you live in 65201 or anywhere around Boone County, you already know the drill: one storm can peel back shingles or loosen fasteners, and the next heat wave bakes the damage in.

We're Columbia Metal Roofing, and we've spent years climbing ladders on everything from historic homes in Benton-Stephens to farm sheds out toward Ashland. When your roof starts leaking or you're ready to upgrade to standing seam, call us at (573) 296-4898. We know the local housing stock and the weather that hits it.

Metal Roofing in Columbia (65201)

Columbia sits on rolling clay and limestone hills, and that ground movement shows up in roof decks. Older Victorians and Foursquares near the university often have steep pitches and deep porches, which means flashing around brick chimneys and porch roofs is where leaks start. In the 1950s and 60s ranches of Lenoir and Brown Station, low-slope shingle roofs are common, and those are prime candidates for a metal retrofit over shingles. Newer subdivision homes in Cherry Hill and Stephens Lake have complex rooflines with valleys and dormers, so panel layout and screw placement matter for wind uplift. Out on the farmland toward Hallsville and Rocheport, we see machine sheds and barns where corrugated panel and standing seam hold up better than shingles against hail and snow load.

Our team has worked on all of these property types. We understand how freeze-thaw cycles in winter work on flashing, and why ice damming shows up on homes with high eaves. We also know which neighborhoods have historic design review and which HOAs want a specific panel profile. If you're in 65201 or the surrounding area, we've likely worked on your street or one nearby.

Our services in Columbia

How a Job Works in Columbia

Step 1: You call (573) 296-4898 or request a free estimate online. We schedule an on-site assessment, usually within a few days. We'll walk the roof, check fasteners, seams, and flashing, and look at attic ventilation and deck condition. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the permit if one is required. Roofing permits are commonly needed for a full replacement in Columbia, and thresholds vary, so we confirm with the local building department. If you're in a historic district or HOA, we help coordinate color and profile approval. On tight lots in older neighborhoods, we plan material staging so we don't block alleys or driveways. Then we tear off or retrofit, install underlayment and panels, and handle flashing and trim.

Step 3: We clean up daily and do a final magnet sweep for nails. You walk the job with our lead, and we don't leave until you're satisfied. We leave your property clean and your roof watertight.

Pricing in Columbia depends on roof size, pitch, access, and condition. For a typical ranch home, metal roof installation starts around $8 per square foot, standing seam from $10, metal roof replacement from $9, and a retrofit over existing shingles from $7. Smaller jobs like leak repair start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel and metal shingles both start around $9 per square foot, while copper and specialty metal start at $20. We give free estimates and explain cost factors like deck repair, flashing replacement, or emergency scheduling. Call (573) 296-4898 to get a ballpark for your Columbia home.

My 1950s ranch in Grasslands has low-pitch shingles and I keep getting ice dams. Will a metal roof help?
Yes, metal roofs shed snow and ice better than shingles, especially on low slopes. But ice dams usually come from warm attic air melting snow that refreezes at the eaves. We check ventilation and insulation during the estimate, and we can add ice protection and proper underlayment so the new roof performs the way it should.
A storm just peeled back panels on my roof near Rock Bridge. How fast can you respond?
We prioritize storm and wind damage calls. Call (573) 296-4898 and we'll schedule an inspection, often same or next day depending on volume. We can tarp or secure the area to prevent further water intrusion, then provide a repair or replacement estimate and document damage for your insurance claim.
What does a standing seam metal roof cost for a typical two-story home in Cherry Hill?
Most two-story homes in Cherry Hill fall in the $10 to $14 per square foot range for standing seam, depending on roof complexity, panel length, and whether we remove the old shingles. That's a ballpark. We measure on site and give you a firm number, including flashing and trim, before you commit.
Do I need a permit for a metal roof replacement in Columbia, and how do I check?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We handle the permit application for you and confirm current rules with the City of Columbia website (https://www.como.gov/) or the local building department. If your home is in a historic district, additional design review may apply, and we help you navigate that.
My HOA wants a specific color for metal roofing. Can you help with approval?
Yes. We provide panel profile and color samples, and we can supply documentation your HOA may request. If your subdivision has architectural review, we coordinate with the board so the install doesn't get delayed. We've worked with HOAs across Columbia and know what they typically ask for.
Are you insured for roofing work on my Columbia property?
We are fully insured, carrying both general liability and workers' compensation coverage. That protects you if anything goes wrong on the job and covers our crew while they're on your roof.
What maintenance should I do on a metal roof in Columbia to prevent leaks?
Check fasteners and sealant around flashing and penetrations once a year, especially after spring hail season. Keep gutters clear of leaves from the white oaks and maples common here. If you see loose screws or lifted panels, call us for a repair before the next storm. A periodic inspection can catch small issues before they become leaks.
Why choose us?

Trusted professionals in Columbia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbia

All your work handled by qualified professionals in Columbia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

330+ Verified Client Reviews in Columbia

⭐⭐⭐⭐⭐ 4.9/5 · 330 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbia · Response within 24h · No commitment · ☎ (573) 296-4898

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm