Serving the Columbia area  ·  (573) 296-4898  ·  Open Mon-Sun 7am-7pm
📞 (573) 296-4898 Free Quote

Metal Roofing in Fulton, MO (65251) · Local Professionals

Columbia Metal Roofing · Fast response in Fulton and the Columbia area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+330Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Fulton's college-town Victorians and brick ranches are showing their age, and a lot of them are still carrying shingle roofs that have seen one too many Missouri hailstorms. From the historic homes near Westminster College down to the brick ranches off Route F, we see the same problems repeat: curling shingles, ice dammed eaves, and gutters that can't keep up.

That's why homeowners in 65251 call Columbia Metal Roofing. We're based in Columbia, just up the road, and we've replaced, repaired, and retrofitted metal roofs all over Callaway County. Whether you're near the Kingdom of Callaway County Fairgrounds or out on a farmstead off Highway 54, we know the local housing stock and the weather that beats on it.

Metal Roofing in Fulton (65251)

Fulton sits on rolling hills with clay and limestone soil, and that matters for roofing. The older Victorians and Foursquares near downtown have steep pitches and deep porches, which means flashing details around chimneys and porch roofs are where leaks start. The 1950s and 1960s brick ranches on the south side often have low-slope shingle roofs that are prone to ice damming at the eaves and wind uplift at the rake edges. And the newer subdivisions off Route F and near the high school have architectural shingles that are now 20 years old and starting to fail. We see a lot of hail bruising and granule loss on those, plus gutters that pull away because the original hangers weren't sized for our freeze-thaw cycles.

Our team has worked on everything from historic homes near the Westminster College campus to metal machine sheds out on the county roads. We know how to handle the tight lots near downtown and the long runs on rural properties. When we quote a metal roof in Fulton, we factor in the pitch, the decking condition, and how we'll get materials to the roof without tearing up your landscaping.

Our services in Fulton

How a Job Works in Fulton

Step 1: You call us at (573) 296-4898 or request a free estimate online. We schedule a time to come out and look at your roof, attic, and gutters. We'll check for soft decking, failed flashing, and signs of ice damming. You get a written estimate with options, including metal roof replacement, retrofit over shingles, or a repair if that's all you need.

Step 2: Once you approve, we pull the permit with the City of Fulton (or Callaway County if you're outside city limits) and order materials. On install day, we protect your landscaping with tarps, tear off the old roof, inspect and repair the decking, then install the underlayment and metal panels. For historic homes or HOA neighborhoods, we coordinate any design review before we order. We keep the job site tidy and haul away all debris.

Step 3: After installation, we do a magnet sweep for nails, clean your gutters, and walk the property with you. We don't leave until you're satisfied and we've shown you how the new roof and flashing work. We also provide documentation for your insurance company if the job is part of a storm claim.

Pricing for metal roofing in Fulton depends on the size and pitch of your roof, the condition of the decking, and the type of metal you choose. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you're retrofitting over existing shingles, that starts at $7 per square foot. Repairs like leak fixes start at $450, and screw replacement or re-fastening starts at $750. Gutters for metal roofs start at $9 per linear foot. We always provide a free, no-pressure estimate so you know exactly what your job will cost. Call (573) 296-4898 to schedule yours.

My 1950s brick ranch near the Fulton Country Club has ice dams every winter. Can a metal roof help?
Yes. Ice damming usually happens because warm air escapes through the ceiling and melts snow on the roof, which refreezes at the cold eaves. A metal roof with proper underlayment and ventilation helps, but we also check your attic insulation and air sealing. We often install snow guards and ice protection on Fulton homes with this problem, starting at $1,200.
A storm just blew some panels loose on my barn off Highway 54. How fast can you get out there?
We prioritize storm and wind damage calls. Call us at (573) 296-4898 and we'll schedule a free inspection, usually within a day or two depending on the backlog after a storm. We can tarp or secure the roof temporarily if needed and give you a repair estimate on the spot.
What's the typical cost to replace a shingle roof with metal on a 1,500-square-foot ranch in Fulton?
For a ranch that size, most metal roof replacements run between $9 and $14 per square foot installed, depending on the panel type and whether we need to repair decking. That puts a typical job in the $13,500 to $21,000 range. We give you a firm quote after inspecting the roof and attic.
Do I need a permit to replace my roof in Fulton, and does the historic district affect metal roofing?
Yes, the City of Fulton requires a permit for roof replacements. If your home is in a historic district, there may be design review for panel profile and color. We handle the permit application and can help you understand what's allowed. Call the city building department to confirm current rules, and we'll coordinate with them.
My neighbor's tree limbs hang over my roof. Can I trim them, and will my HOA approve a metal roof?
You can trim branches that cross your property line, but check local ordinances first. For HOA approval, we provide product specs and color samples to submit to your board. Many Fulton HOAs allow metal roofs if the color matches the neighborhood, but it's best to get written approval before we order materials.
Are you insured for roofing work on my Fulton property?
Yes, we are fully insured with general liability and workers' compensation coverage.
What maintenance does a metal roof need in Fulton's climate?
Metal roofs are low maintenance, but we recommend an annual inspection, especially after hail or wind storms. Check fasteners for tightness, clear debris from valleys and gutters, and touch up any scratches in the paint. In Fulton's freeze-thaw cycles, keeping gutters clear helps prevent ice dams. We offer free inspections to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Columbia

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Columbia

All your work handled by qualified professionals in Columbia

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

330+ Verified Client Reviews in Columbia

⭐⭐⭐⭐⭐ 4.9/5 · 330 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Columbia · Response within 24h · No commitment · ☎ (573) 296-4898

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Columbia ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm